AG亚洲

 
Close
(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories
    Filters
    Preferences
    Search

    HMI Touch Screen, 7 Inch, 800 x 480

    5 out of 5 based on 1 reviews | Write a review
    $369.72
    Low cost HMI touch scaeen for sale, manufacturer direct sales, 7 inch Human Machine Interface display touch screen, 800 x 480 pixels. HMI uses the latest Cortex-A8 / dual-core high-speed processor and a 65,536-color color LCD screen with high brightness and contrast, manufacturer direct sales.
    SKU: ATO-HMI-7
    *
    Free Shipping Worldwide
    Delivery date: 6-20 days

    HMI toch sreen manufacturer direct sales, industrial HMI touch panel with 10 inch TFT LCD display, 1024 x 600 pixels, equipped with HMI programming software DOPSoft 4.0 and built-in Lua editor, it can be easily programmed, and has alarm / history / user rights functions for efficient management.

    Specification:

    Model ATO-DOP-107CV ATO-DOP-B07S415
    LCD Module Display 7" TFT LCD
    Resolution 800 x 480 Pixels
    Back Light LED Back Light
    Back Light Brightness 400 cd/m2 350 cd/m2
    Back Light Life 20000 Hours
    Display Area 226 X 128.7 mm /
    Display Colors / 65536 Colors
    MCU ARM Cortex-A8 (800MHz) 400 MHz
    Flash ROM 256 Mbytes 128 MB
    RAM 256 Mbytes 64MB
    Touch Panel Four-wire resistor, over 10,000,000 pressing times
    Backup Memory (Bytes) / 16 MB
    Audio Output Buzzer Multi-Tone Frequency (2K ~ 4K Hz) / 80dB Multi-Tone Frequency(2K ~ 4K Hz)/ 85dB
    AUX N/A N/A
    USB 1 USB Slave Ver 2.0 / 1 USB Host Ver 2.0 1 USB Host Ver 1.1 / 1 USB Client Ver 2.0
    SD N/A SD card (Supports SDHC)
    Serial COM Port COM1 RS-232 (supports hardware flow control) RS-232 (Supports hardware flow control) (Note 2)
    COM2 RS-232 (supports hardware flow control) / RS-485*2 RS-232 / RS-422 / RS-485(Note 2)
    COM3 RS-422 / RS-485*2 RS-232 / RS-422 / RS-485(Note 2)
    VGA Input / N/A
    Delta Professional Integration Function / N/A
    Function Key / N/A
    Perpetual Calendar RTC Built-in
    Cooling Natural air circulation
    Certification CE, UL
    Waterproof IP65 / NEMA4 / UL Type 4X
    Operation Voltage*3 DC +24V (-15% ~ 15%)*2
    Voltage Endurance A500V for 1 minute (between charging DC24 terminal and FG terminals)
    Power Consumption*5 Max. 8.5 W*3 5 W
    Backup Battery 3V lithium battery CR2032 × 1
    Backup Battery Life Depends on the temperature used and the conditions of usage, usually about 3 years or more at 25° C
    Operating Temperature 0℃ ~ 50℃
    Storage Temperature -20℃ ~ 60℃
    Ambient Humidity 10% ~ 90% RH (0 ~ 40° C), 10% ~ 55% RH (41 ~ 50° C), Pollution Degree 2
    Vibration IEC 61131-2 compliant 5Hz ~ 8.3Hz = Continuous: 3.5mm, 8.3Hz ~ 150Hz = Continuous: 1.0g
    Shock IEC 60068-2-27 compliant 15g peak for 11ms duration, X, Y, Z, directions for 6 times
    Dimensions (W) x (H) x (D) 215 x 161 x 61.2mm 215 × 161 × 50mm
    Mounting Dimension W) x (H) 196.9 x 142.9mm 196.9 × 142.9mm
    Weight 970g

    Features

    1. ATO HMI Embedded Linux System Open system for flexible and stable program development.
    2. New software DOPSoft 4.0 offers more complete functions and a better interface.
    3. Compliant with industrial operation environments, CE / UL Certified Compliant with CE and UL standards.
    4. Ethernet Communication Connects to master device, or PLC with high-speed Ethernet communication.
    5. Communication Isolation COM and Ethernet ports with built-in isolation circuits enhance communication stability. FTP/eMail Supported Simple data transmission    and real-time status report.
    6. Easy setting to play vivid GIF elements.
    7. Simple and easy structural programming language to meet various demands.
    8. Pressing times >10,000,000 Effective pressing times increased through strict endurance tests.
    9. IP65 Rating, the front case protects the HMI from snow, rain, and dust.
    10. Diagnostics Function Collects and solves issues remotely, power Isolation, protects the HMI from accidental surge interference.
    AG亚洲11. VNC Remote Monitoring Remote control with mobile devices, supports PDF and TXT Reader, PDF and TXT files supported, User-Friendly, intuitive operation interfaces for users.

    ATO-DOP-107CV Dimension (Unit: mm)
    ATO-DOP-107CV dimension
    ATO-DOP-B07S415 Dimension (Unit: mm)
    ATO-DOP-B07S415 dimension
    Tips: Human Machine Interface Troubleshooting

    •  The HMI human machine interface is not responding, and no part is responded to when pressed.
      Solution: In this case, first check whether each wiring interface is loose, and then check whether the serial port and interrupt number conflict. If it is caused by the conflict, then the resources should be adjusted to avoid conflict.
      Secondly, check whether there are cracks on the surface of the man-machine interface. If cracks are found, they should be replaced in time. In addition, it is also necessary to check whether there is dust on the surface of the man-machine interface, and if so, remove it with a soft cloth. Observe and check whether the indicator light on the control box is working properly. When it is normal, the indicator light is green and blinking.
      If the above parts are normal, you can use the replacement method to check the man-machine interface, first replace the control box, then replace the touch screen, and finally replace the host.
    • The human machine interface is normal but the computer cannot operate. A human-machine interface, after testing, everything is normal, but after connecting the host, the computer can not operate.
      Solution: There are two reasons for this situation. First, it may be that the display unit driver version is too low and you need to install the latest driver. Second, it may be that the HMI control card receives the operation signal before the host starts loading the HMI driver, and only needs to restart the computer after the power is turned off.
    • Inaccurate touch.
      Solution: There are two reasons for this phenomenon. The first possibility is that the reflection stripes of the sonic screen are slightly damaged, and it cannot be completely repaired in this case; the second possibility is that the reflection stripes around the screen are covered with dust after using the sonic man-machine interface for a period of time , You can wipe with a soft dry cloth, then power off, restart the computer and recalibrate.

    AG亚洲This video will show you HMI and PLC programming and testing.

    Existing reviews of HMI Touch Screen, 7 Inch, 800 x 480
    Good HMI Touch Screen
    I like this kind of display. The industrial HMI touch screen is bright and clear, works perfectly, and is worth buying.
    From: Peter | Date: 14/05/2020
    Was this review helpful? Yes No (0/0)
    Write your review for HMI Touch Screen, 7 Inch, 800 x 480
    • Only registered users can write reviews
    • Bad
    • Excellent