AG亚洲

 
Close
(0) Shopping cart
You have no items in your shopping cart.
Shopping Categories
    Filters
    Preferences
    Search

    Digital Rotary Torque Sensor, 0.1/5/300/1000 Nm to 10000 Nm

    5 out of 5 based on 1 reviews | Write a review
    $939.15
    Digital rotary torque sensor with LCD display has the capacity range from 0.1 Nm/0.3 Nm/1 Nm/5 Nm/10 Nm/300 Nm/1000 Nm to 10000 Nm. LCD display can show torque, speed and power value at the same time. Dynamic torque sensor adopts two NSK shafts to ensure starting torque as low as 0.00001 Nm. Rotary torque sensor with 7 pin waterproof circular connector and 3m cable can measure both forward and reverse torque, and then output ±5V/±10V/4-20mA/RS485 torque signal to PLC.
    SKU: ATO-TQS-D03
    *
    *
    Free Shipping Worldwide
    Delivery date: 15-30 days

    Rotary torque sensors have capacity range from 0.1 Nm, 0.3 Nm, 0.5 Nm, 1 Nm, 2 Nm, 5 Nm, 10 Nm, 20 Nm, 100 Nm, 300 Nm, 1000 Nm, 5000 Nm to 10000 Nm. Torque sensor capacity can be customized according to customer requirements. ATO torque sensor can directly output standard signal (±5V/±10V/4-20mA/RS485) to PLC, DCS and other automation control systems.

    Specification:

    Model ATO-TQS-DYN-200
    Shipping weight 7~18kg
    Capacity range * 0-0.1 Nm ~ 0-10000 Nm
    Note: The capacity of 0.1~5 Nm has another customizable shaft diameter 10mm, you can order it by email.
    Display LCD display (show torque/speed/power value)
    Non-linearity 0.1%FS
    Hysteresis 0.03%FS
    Repeatability 0.03%FS
    Temperature drift on zero <0.01%FS/℃
    Temperature effect on output <0.01%FS/℃
    Power supply DC 24V
    Consumption current <150mA
    Load resistance ≥2kΩ
    Output torque ±5V, 0-10V, 4-20mA
    Output speed 60 pulse per revolution
    Response performance 1kHz
    Signal delay 0.6ms
    Ultimate overload 200%FS
    Rated speed 10000rpm
    Maximum speed 15000rpm
    Maximum rotating angle 2.60*10rad (0.149°)
    Inertia moment 0.38kg·cm
    Natural vibration frequency 19.4kHz
    Torsion constant 3.85*10Nm/rad
    Elastic element material 17-4 stainless steel
    Operating temperature -10℃~+50℃ (14~122℉)
    Humidity 0~85%RH
    Electrical connection 7 pin waterproof circular connector
    Cable length 3m (Φ5mm)
    Pin definition 1: Red, PWR (+24V)
    2: Black, PWR (0V)
    3: Green, SIG OUT (±5V/±10V/4-20mA)
    4: White, SIG GND
    5: Yellow, RS485 A
    6: Blue, RS485 B
    7: Orange, RPM+
    8: Gray, RPM-
    Shielded line

    Dimension (unit: mm):
    1. Dimension for capacity 0.1~100 Nm (Basic Thread: 53*53, 4-M8 depth 10)
    Rotary torque sensor dimension for capacity 0.1-100 Nm
    2. Dimension for capacity 200~300 Nm (Basic Thread: 53*53, 4-M8 depth 10)
    Rotary torque sensor dimension for capacity 200-300 Nm
    3. Dimension for capacity 500~800 Nm (Basic Thread: 75*60, 4-M8 depth 12)
    Rotary torque sensor dimension for capacity 500-800 Nm
    4. Dimension for capacity 1000~5000 Nm (Basic Thread: 75*60, 4-M8 depth 10)
    Rotary torque sensor dimension for capacity 1000-5000 Nm
    5. Dimension for capacity 10000~20000 Nm (Basic Thread: 120*80, 4-M12 depth 25)
    Rotary torque sensor dimension for capacity 10000-20000 Nm
    Tips

    Existing reviews of Digital Rotary Torque Sensor, 0.1/5/300/1000 Nm to 10000 Nm
    Torque sensor connection
    Can your torque sensor be setup such that one end is connected to the motor while the other end is connected to nothing? What sort of reading will I get if this is the case?
    From: Connor | Date: 08/04/2020
    Was this review helpful? Yes No (0/0)
    ATO Responded
    Unfortunately, can't be connected like this. Because if the other end of the rotary torque sensor is not connected (no load equipment), there will be no data to compare between the input and output, and the reading will be abnormal.
    Write your review for Digital Rotary Torque Sensor, 0.1/5/300/1000 Nm to 10000 Nm
    • Only registered users can write reviews
    • Bad
    • Excellent